Infinity Systems Inc Car Speaker 9612i User Manual

4012i,5012i,6012i,6012si,9612i,  
9613i,3012cf,6412cf,6412cfp,6812cf  
t
reference series  
INSTALLATION  
CONNECTIONS  
Figure 3. Mounting the 6412cf and 6412cfp.  
Figure 4. Mounting the 6012i or 6012si with  
Figure 6. Mounting the 6012i or 6012si in standard  
Figure 7. Connect the speakers to the amplifier  
the grille.  
speaker locations.  
observing proper polarity.  
Note:The 6412cf and 6412cfp are designed to be  
installed under factory grilles. Consequently, no  
grilles are packaged with these models.  
Note: If you are replacing a DIN (oval basket)  
4" x 6" speaker with a 6412cf, remove the speaker  
from the mounting bracket as shown in Figure 3.  
BIG LUG IS  
POSITIVE (+)  
SMALL LUG  
IS NEGATIVE (—)  
Figure 5. Mounting the 6012i or 6012si in 165mm  
speaker locations.  
FOAM GASKET  
FOAM GASKET  
UniPivot Tweeter: Rotate tweeter, so it is angled  
toward the listener, using the UniPivot feature  
on the 5012i, 6012i, 9612i and 6812cf.  
INTERMOUNT III (PATENT NO. 6,505,705)  
The 6012i and 6012si are packaged with two  
different speaker adaptor rings.These are used  
to install the 6-1/2" speakers in various vehicles.  
The metal ring can be mounted in many  
European vehicles, while the plastic ring can be  
mounted in many vehicles using 6-3/4" speaker  
locations or three-point mounting frames.  
FOAM GASKET  
MOUNTING RING  
FOAM GASKET  
reference series  
SPECIFICATIONS  
4012i  
Type:  
6012si  
Type:  
3012cf  
Type:  
6812cf  
Type:  
4" 2-Way  
4 Ohms  
35W RMS, 105W Peak  
85Hz – 21kHz  
91dB  
1-7/8" (48mm)  
3-3/4" (96mm)  
6-1/2" Shallow-Mount  
2-Way  
4 Ohms  
50W RMS, 150W Peak  
53Hz – 21kHz  
92dB  
1-15/16" (50mm)  
5" (127mm)  
3-1/2" 2-Way  
4 Ohms  
25W RMS, 75W Peak  
85Hz – 21kHz  
90dB  
1-7/16" (37mm)  
3-1/16" (78mm)  
6" x 8"/5" x 7" 2-Way  
4 Ohms  
60W RMS, 180W Peak  
49Hz – 21kHz  
92dB  
2-7/16" (62mm)  
5" x 7-3/16"  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
(127mm x 183mm)  
5012i  
Type:  
6412cf  
Type:  
9612i  
Type:  
5-1/4" 2-Way  
4 Ohms  
45W RMS, 135W Peak  
67Hz – 21kHz  
91dB  
2-1/4" (58mm)  
4-11/16" (120mm)  
4" x 6" 2-Way  
4 Ohms  
40W RMS, 120W Peak  
72Hz – 21kHz  
91dB  
1-15/16" (50mm)  
3-5/8" x 5-5/8"  
(93mm x 143mm)  
6" x 9" 2-Way  
4 Ohms  
100W RMS, 300W Peak  
46Hz – 21kHz  
92dB  
3" (77mm)  
6-1/16" x 8-7/8"  
(154mm x 226mm)  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
6012i  
Type:  
6-1/2" 2-Way  
4 Ohms  
60W RMS, 180W Peak  
53Hz – 21kHz  
92dB  
2-1/16" (53mm)  
5" (127mm)  
6412cfp  
Type:  
9613i  
Type:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
4" x 6" 2-Way Plate  
4 Ohms  
45W RMS, 135W Peak  
72Hz – 21kHz  
6" x 9" 3-Way  
4 Ohms  
100W RMS, 300W Peak  
46Hz – 21kHz  
92dB  
3" (77mm)  
6-1/16" x 8-7/8"  
(154mm x 226mm)  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
Speaker Impedance:  
Power Handling:  
Frequency Response:  
Sensitivity (2.83V, 1m):  
Mounting Depth:  
Cutout Diameter:  
91dB  
Declaration of Conformity  
1-15/16" (50mm)  
3-9/16" x 5-11/16"  
(91mm x 145mm)  
We, Harman Consumer Group International  
2, route de Tours  
72500 Chateau-du-Loir  
France  
A valid serial number is required for warranty coverage.  
Features, specifications and appearance are subject to change without notice.  
declare in own responsibility that the products  
described in this owner’s manual are in compliance  
with technical standards:  
EN 61000-6-3:2001  
EN 61000-6-1:2001  
Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA  
Klaus Lebherz  
© 2005 Harman International Industries, Incorporated • Part No. REFME1/05  
Harman Consumer Group International  
Chateau-du-Loir, France 1/05  
¤

Acer Car Video System S220HQL User Manual
Alpine CTA 1502R User Manual
Alpine Electronics Car Stereo System CDE 130RM User Manual
Audiovox VOH1042 User Manual
Blaupunkt VA1400 User Manual
Canon FD 35 User Manual
Dicota DataDesk 450 User Manual
Fujitsu Siemens Computers Bump Case FPCCC24 User Manual
Hypertec N12228PHY User Manual
JVC Car Stereo System KD R338 User Manual