JVC Stereo System VC P840U User Manual

Cable  
VC-P840U  
Product Information Manual  
Product Feature  
The VC-P840U provides a direct video signal connection between the JVC’s HD studio Viewfinder (VF-HP840U) and the  
GY-HD250U/GY-HD200UB. This cable carries the camera’s RGB, CMP or a Y signal depending on the Camera’s VF  
menu setting. The Tally and Preview signal is sent from the camera to the VF-HP840U via serial communication. This  
cable does not provide power to the camcorder. It is approximately 2ft long.  
User Benefit  
This cable gives the Studio System Integrator the flexibility of using the VF-HP840U in studio applications that do not use  
the studio sled (KA-HD250U); such as when a third party CCU manufactured by Telecast Fiber or Camplex is used.  
Owners of the GY-HD250U and GY-HD200UB also have the choice of using the high definition VF-HP840U in non studio  
applications that require a viewfinder with built in features such as safety markers, focus assist, and zebras in non studio  
applications that require critical focus and VF functionality.  
Required Camcorder and VF-HP840U settings  
When using this cable:  
Set the GY-HD250U/GY-HD200U(B) Camera’s “VF Signal” in the “LCD/VF” menu group to “COMPONENT”.  
Set the VF-HP840U’s Dip Switch4 to “OFF”. This terminates the video inputted into the studio Viewfinder with 75  
ohms.  
Dip switch is located on the bottom of the VF-HP840U under a cover plate. Remove two screws from cover plate and take  
cover off to expose dip switch  
 

Ingersoll Rand Remote Starter 3524832 User Manual
Innotek Switch ADV 1000E User Manual
Interfire Audio Car Amplifier G2 1200 User Manual
Jasco Computer Keyboard 98552 User Manual
Karcher Pressure Washer G 3025 OH User Manual
Kenmore Gas Grill 12216643900 User Manual
Kenwood Stereo Amplifier KAC X10D User Manual
King Canada Dust Collector KC 3108C User Manual
KitchenAid Refrigerator W10310148A User Manual
Kompernass Clock Radio KH 20 User Manual